Page 19
Wall Mounting
The NG range generator is designed to be mounted against a wall for safety reasons.
Supplied in the generator fittings kit are all the fittings required to wall mount the
generator. Detailed below are the necessary steps to mount the unit to a wall.
Locate the screw in the top rear corner of the unit, beside the yellow warning label.
Remove the screw from the generator this should be repeated for the other side of the
unit, and retain.
Next, using the screw which was removed, fit the bracket and washers provided to the
generator. Again this should be repeated for the other side. The bracket is adjustable
to accommodate varying kickboard widths.
Finally, using the dimensions provided, fix the wall plugs to the wall, ensuring wall
plug is suitable for the type of wall. If not, use the correct type. Secure the generator
to the wall with the screws from the fittings kit.
