Page 18
Removal of Transit Brackets
The transit brackets must be removed prior to switching the unit on.
Failure to do so will result in damage to the equipment. This will void
the warranty on the Generator and will result in a chargeable repair.
To remove the transit bracket first remove the 11 screws on the front panel as shown,
then remove the front panel from the generator.
Now locate the red transit bracket attached to the compressor foot plate, and remove
the two screws on the bracket. Next remove the transit bracket by first lifting up and
then out of the generator.
Replace the front panel and secure it to the generator using the 11 screws that were
previously removed.
CAUTION
