Page 26
Service Indication
The generator has the following Service Indication Stages:-
Stage 1
Once either compressor requires a service the HMI will show a service icon.
This is to make the user aware that a service of the generator is due and should be
planned at the earliest convenience. The generator will continue to operate as normal
with the HMI service icon showing.
Stage 2
If the service is not completed the generator will continue to run. After 2 weeks, the
service HMI will show a service icon.
This is to make the user aware that the service of the generator is now overdue and
must be completed immediately to ensure the continuous trouble free operation of the
generator.
Service Indication Reset
Once the service has been completed the Service Indication on the HMI can be reset in
the main control PCB. This will be performed by the Peak Service Engineer or trained
service representative that completes the service operation.
Summary of Contents for Genius XE SMZ
Page 1: ...Genius XE SMZ User Manual Rev 1 RSID 4041 EN 09 02 21 Genius XE SMZ User Manual...
Page 30: ...Page 30...
Page 31: ...Page 31...
