Page 13
Installation
Generator Environment
The generator is designed for indoor use only. It should be installed adjacent to the
application it is supplying. If this is not convenient then the unit can be sited elsewhere,
however, consideration should be made of the lengths of pipe runs as pressure drops
can result from extended runs of pipe.
Performance of the generator is affected by ambient conditions. Please note that the
generator’s function is primarily to remove Oxygen and Moisture from the generated
Nitrogen and/ or Dry Air. Though, depending on model, some hydrocarbon technology
may be employed by the generator, in environments with high ambient concentrations
of THC additional THC removal filtration may be required, or service life of integrated
THC traps may be significantly reduced. Note should also be taken to the proximity of
Air Conditioning outlets. These can sometimes give rise to “pockets” of air with high
relative humidity. Operation of the unit within such a pocket could adversely affect its
performance. Consideration should also be given to the air flow around the unit. It is
recommended that an air gap of 100mm (3.9”) should be maintained down both sides
and at the rear of the unit. Please refer to the drawing on the following page for the
general dimensions of the unit.
Please ensure Generator is situated in a well vetilated environment and is positioned to
allow easy disconnection from the mains supply if required
Minimum Operating Ambient Temperature:
5 °C (41 °F)
Maximum Operating Ambient Temperature:
30 °C (86 °F)
Summary of Contents for Genius XE SMZ
Page 1: ...Genius XE SMZ User Manual Rev 1 RSID 4041 EN 09 02 21 Genius XE SMZ User Manual...
Page 30: ...Page 30...
Page 31: ...Page 31...
