PE micro Cyclone MAX, User Manual

Page: 52 / 88

46 Cyclone for ARM devices User Manual
Cyclone for ARM ® devices
configuration into a file, which may be used for future reference, e.g.,
comparing the Cyclone for ARM devices contents with the file to see if they
are the same.
5.1.11 Load Cyclone Configuration
“Load Cyclone Configuration” in the file menu allows the user to load a
configuration that has previously been saved in order to create a new image.
5.2 Manage Multiple SAP Images
The Manage Images utility, shown in Figure 5-9 , allows the Cyclone to store
and manage multiple images in the Cyclone’s internal memory. Once the
programming images have been created and saved to the disk using the
Create Image utility, they may then be loaded collectively onto the Cyclone. If
you have purchased a CompactFlash activation license it will also allow you
to store and manage multiple images on any compatible CompactFlash cards
that are loaded into the Cyclone’s CompactFlash port.