PowerWave 2 Bus System BCMS Setup and Operation
14
3
BCMS Setup: Accumulator Application
The Accumulator Setup
Application lets you identify, define, and calibrate monitored devices in a bus
run.
A “device” is a
monitored unit or connection that is represented by a points list. PowerWave 2
monitored devices are the following:
•
The input power source at the power feed.
•
Tap Off Boxes (each monitored Tap Off Box has its own points list).
3.1
Download Setup Software and Other Documentation
1.
To do busway BCMS setup, you will need the following as prerequisites:
a.
A PC with Microsoft Windows installed.
b.
(1) Male A to Male B USB cable sufficient to reach from your PC to the Comm Box on the
Power Feed enclosure.
c.
Setup software and USB device driver:
i.
Download the software from the PDI website (or use the CD with your
shipment):
http://www.pdicorp.com/services/service-software-downloads
ii.
Select
Busway BCMS Customer CD.
Figure 6 Download Busway Customer CD
2.
The Busway BCMS Customer CD is compressed. Extract the contents of the CD to its own directory.
The CD includes these files:
a.
Setup application (Accumulator_Setup_Version)
b.
Points Lists for input power source monitoring (IN PM) and Tap Off Box monitoring
(iBus)
c.
Documentation
