background image

 

Communication  
Systems Inc.

 

PDI-P26/P32/P40LCDE 

 Quick Start Guide  

Page 1 of 12 

Better Solutions Are Within Reach™ 

 

PDi Communication Systems, Inc.   40 Greenwood Lane   Springboro, Ohio 45066 USA   PH +1-937-743-6010 PH +1-937-743-5664  

 

Document Number:  PD196I190R1.DOC 

  

 

 

 

WARNINGS 

 

 

This symbol is intended to alert the user of the 

presence of un-insulated ‘dangerous voltage’ within 

the product’s enclosure that may be of sufficient 
magnitude to constitute a risk of electric shock to 
persons. 

 

This symbol is intended to alert the user of the 

presence of important operating and maintenance 

(servicing) instructions in the literature 

accompanying the appliance. 
 

NOTE TO CABLE TV INSTALLER 

This reminder is provided to call the cable TV systems installer’s 
attention to Article 820-40 of the National Electrical Code. The 
code provides guidelines for proper grounding and, in particular, 
specifies that the cable ground shall be connected to the 
grounding system of the building, as close to the point of the 
cable entry as practical. 

FCC 

This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to part 15 of the FCC 
Rules. These limits are designed to provide reasonable 
protection against harmful interference when the equipment is 
operated in a residential or commercial installation. If this 
equipment does cause harmful interference to radio or TV 
reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference 
by one of more of the following measures: 

ƒ

  Reorient or relocate the receiving antenna. 

ƒ

  Increase the separation between the equipment and 

receiver. 

ƒ

  Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected. 

ƒ

  Consult the dealer or an experienced radio/TV technician 

for help. 

SAFETY INSTRUCTIONS 

INSTRUCTIONS 

Be sure to read, follow, and keep these instructions. Heed all the 
warnings.

 

OTHER EQUIPMENT 

Use only with the cart, stand, tripod, bracket or table specified by 
the manufacturer or sold with the apparatus. Use caution when 
moving the cart / apparatus combination to avoid injury from tip-
over.

 

 

MAINTENANCE AND SERVICING 

Servicing is required when the apparatus has 
been damaged in any way: the power cord or 
plug is damaged, liquid has been spilled, 
objects have fallen into the apparatus, the 
apparatus has been exposed to rain or 
moisture, it does not operate normally, or it 
has been dropped. 
Never remove the back cover of the TV; this 
can expose you to high voltage and other 
hazards. If the TV does not operate properly, 
unplug it and call an authorized service 
center or PDI. 

POWER CORD 

Protect the power cord from being walked on 
or pinched particularly at the plugs, 
convenience receptacles, and the point where 
it exits from the apparatus. 

CAUTION:

 DO NOT defeat the safety 

purpose of the polarized or grounding-type 
plug.  A polarized plug has two blades with 
one wider than the other.  A grounding 
type plug has two plates and a third 
grounding prong.  The wide blade or the 
third prong is provided for your safety.  If 
the provided plug does not fit into your 
outlet, consult an electrician for 
replacement of the obsolete outlet. 

 

RAIN AND MOISTURE 
WARNING

: To avoid the hazards of fire or 

electrical shock, DO NOT expose this TV to 
rain or moisture. 

 

  

WET LOCATION 

The apparatus SHOULD NOT be exposed to 
dripping or splashing. Objects filled with 
liquids, such as vases, SHOULD NOT be 
placed on the apparatus. 

OXYGEN ENVIRONMENT 
WARNING

: DO NOT use in an oxygen tent 

or an oxygen chamber. Such use may cause 
a fire hazard. 

CLEANING AND DISINFECTION 

Clean the exterior of this TV by removing 
dust with a lint-free cloth.  

CAUTION:

 To avoid damage to the surface 

of the TV, DO NOT use abrasive or chemical 
cleaning agents. Clean only with a dry cloth. 

DISCONNECTING DEVICE FROM MAINS 

The main plug is the disconnecting device.   

CAUTION:

 Unplug this apparatus during 

lightning storms or when unused for long 
periods of time. 

PRODUCT MODIFICATION 

DO NOT attempt to modify this product in 
any way without written authorization. 
Unauthorized modification could void the 
user’s authority to operate this product.   

OVERHEAD FALLING HAZARD 
WARNING

: To prevent injury, this apparatus 

must be securely attached to the wall in 
accordance with the installation instructions.  
TVs can pose a striking hazard when 
mounted at an elevated position.

 

Summary of Contents for PDI-P26LCDE













Reviews: