Communication
Systems Inc.
PDI-P23LCDC Quick Programming
Instructions
Page 1 of 3
Better Solutions Are Within Reach™
Document Number PD196-121 Rev 1
These instructions are provided as a quick start for programming the PDI-P23LCDC television.
The instructions assume you have installed the TV on the wall, correctly wired and connected a
compatible pillow speaker, and have the programming remote control in hand. See the User’s
Manual for details.
Channel Setup
The TV offers three different programmable channel banks or Service Levels. Programming is
only accomplished using the handheld remote control.
Signal
Four different tuning types are available depending upon the healthcare facilities signal style.
Selection of the correct signal type is required for the TV to recognize all possible channels and
before any channel programming can begin.
1. Press the SETUP button to display the SETUP MODE menu.
2. Press the CH
▲
/ CH
▼
button to select Signal.
3. Press
VOL
◄
/ VOL
►
to select Air, Cable STD, Cable IRC or Cable HRC. NOTE: Most
hospitals use the Cable STD signal style.
4. Press the CH
▲
/ CH
▼
button to select Mode.
5. Press
VOL
◄
/ VOL
►
to set the scope of channel scanning.
Analog Only: TV searches for analog channels only.
Digital Only: TV searched for digital channels only.
Analog and Digital: TV searches for both analog and digital channels.
