AEC206 Reference Manual
Mounting Artificial Pinnae
2-2
2.2 Mounting Artificial Pinnae
The AEC206 has two pinna options:
•
Artificial Pinna shore OO-35; left and right
•
Primary use
•
Artificial Pinna shore A-25; left and right
•
Alternative option, for example, free field checks
TAKE NOTE
The pinna can be
installed before or after the
ring has been installed. If the
ring is already mounted, ease
the pinna into the space with
your finger until the edges are
flush under the plate.
To mount the artificial pinnae, follow these steps:
Step 1
Align the bottom notch on the back of the pinna with the
alignment screw on the AEC206, push into place.
Step 2
Mount the alignment ring using the supplied 2 mm hex
driver and the four 2.5 mm screws. Gently turn the screws
and stop once they are secure. Do not over tighten.
TRY THIS
If you lift up the
earlobe, the notch in the pinna
and the notch in alignment
ring will make a small circle.
This indicates that you have
mounted them correctly.
FIGURE 2-2
Pinna Assembly
