9
5
QUICK
START
5.
QUICK START
In order to get familiar with your new camera and software it might be
helpful, if you first aim at an object that is easy to focus and that can
be seen at standard light conditions.
5.1
PREPARATION
•
Computer is turned on
•
Installation is finished (see chapter
•
An appropriate lens is attached (remove cap) or the camera is
attached properly to the microscope, spectrograph or other
scientific device
•
Camera is connected to the PC
5.2
START
Start pco.camware and the graphical user interface starts up:
NOTE
Always install latest pco.camware version to be able to use full
function of your camera (www.pco.de/support).
Summary of Contents for pco.edge 4.2 bi
Page 1: ...pco edge 4 2 bi pco edge 4 2 bi UV pco user manual...
Page 34: ...pco...
