Pco pco.edge 4.2 bi, User Manual

Page: 20 / 34

20
A1.3 REAR PANEL
Status LEDs
(LED1: green / red; LED 2: orange)
Color Description
Red / green continuous Camera is booting
Green Camera is ready for operation
Orange continuous Arm camera / rec state off
Orange blinking Recording on
Red continuous Error
Interface Connector
USB 3.1 plug Type-C screwable;
Power delivery for the camera over USB cable
SMA Inputs
(see chapter 7 )
Input (1=Exposure Trigger; 2=Acquire Enable)
Type Digital
Level 3.3 V LVTTL (5 V tolerant)
Coupling DC
Impedance 1 k
Ω
Slew rate > 1 V/ms
SMA Outputs
(see chapter 7 )
Output (3=Status Busy; 4=Status Expos)
Type Digital
Level 3.3 V LVTTL
Coupling DC
Power Input
LEMO socket ECG.0B.302.CLV
Pin1 Ground
Pin2 VCC 24 V DC (+10%)
Appropiate Lemo plug: FGG.0B.302.CLAD52Z
Power Switch
3
1 4
2
1
4
3
2
5
6
Pin1 Pin2
5
6