Pco dicam C1, User Manual

Page: 37 / 64

37
A1 TECHNICAL DATA PCO.DICAM C1
A1.2 SPECIFICATIONS
sCMOS Image Sensor
Type of sensor scientific CMOS (sCMOS)
Dynamic range 13 600 : 1 (82.7 dB) P46
27 200 : 1 (88.7 dB) P43
Resolution (h x v) 2048 x 2048 active pixels
Pixel size (h x v) 6.5 µm x 6.5 µm
Sensor format / diagonal 13.3 mm x 13.3 mm / 18.8 mm
Shutter mode single image / double image
Fullwell capacity (typ.)
15 000 e
-
P46
30 000 e
-
P43
Spectral range 300 nm ... 1000 nm
Dark current < 0.6 e-/pixel/s @ 7 °C
Quantum efficiency 58 % for P43 peak emission @ 545 nm
57 % for P46 peak emission @ 530 nm
Readout noise
1.1 med / 1.5 rms e
-
single image
2.2 med / 2.5 rms e
-
double image
DSNU
1.0 rms e
-
PRNU < 0.6 %
Anti blooming factor 1 : 10 000
Image Intensifier
Type HighRes MCP (6 µm channel)
Input window synthetic silica, borosilicate
(MgF2 optional)
Output window glass
Photocathode material S20, GaAs, GaAsP (others on request)
Phosphor screen material P43, P46
Image intensifier pitch distance 6 µm
Image intensifier MCP type single stage low resistance MCP for
high strip current
MCP operational modes continuous
gated for enhanced extinction ratio
Image intensifier diameter 25 mm (18 mm optional on request)
Image intensifier system
resolution > 50 lp/mm @ 5% MTF typical (depends
on phosphor)
Shortest gating time 4 ns
Optical Coupling Lens System
“ultra speed tandem lens” between image intensifier & sCMOS
Transmission efficiency
> 30 %
Vignetting < 3 %
Resolution > 60 lp/mm
Scaling rates ß=0.53 for 25 mm intensifier
General
Power supply 18 ... 28 VDC
Power consumption 35 ... 40 W
Weight 7 kg
Operating temperature + 10 °C ... + 40 °C
Operating humidity range 10 % ... 80 % (non-condensing)
Storage temperature range - 10 °C ... + 60 °C
Optical interface F-mount;
optional: C-mount, Canon mount
Lens remote controller electronic control for Canon EF lenses
CE / FCC certified yes