PCM -5820 Series, User Manual, Page: 36 / 120

26 PCM-5820 Series User's Manual
2.16.3 LCD power setting (J6)
The PCM-5820 Series' PCI SVGA interface supports 5 V and 3.3
V LCD displays. By changing the setting of J6, you can select the
panel video signal level to be 5 V or 3.3 V.
Table 2-6: LCD power setting
*5 V 3.3 V
J6
* default setting
Configuration of the LCD type is done completely via the software
utility. You do not have to set any jumpers. Refer to Chapter 3 for
software setup details.
Refer to Chapter 3 for details on connecting the two standard
LCDs: Toshiba LTM10C042 and LTM 12C275A.
2.17 LVDS interface (CN15)
The user can use this interface for long distance connections to an
LCD panel. Data can be tranfserred over distances up to 5 meters.
The PCM-5820 Series supports an 18-bit LVDS TFT LCD panel
via an LVDS interface (CN15). It consists of a 20-pin dual in-line
header.
1 2 3 1 2 3