© PCE Instruments
48
5.9
Manual
This menu show s a QR code. This code can be decoded w ith a suitable scanner like, for example,
a mobile phone and it links directly to this manual.
5.10
Info
This menu show s the device name and firmw are version.
6
Measurement
6.1
Measurement screen
After turning on the device, the measurement screen is displayed. The sensor converts the
continuously recorded mechanical vibration into an electrical signal w hich is subsequently
evaluated according to the set parameters and displayed as a measured value.
When the meter is started for the first time and after resetting the device settings, the display
show s the RMS value of the measured vibration velocity in mm/s.
When measurement parameters are adjusted via the menu, the changed settings are applied and
displayed w hen returning to measurement mode. These w ill also remain w hen the meter is turned
off and back on.
The menus for the measuring unit and the parameters can also be accessed directly from the
measuring screen, by using the arrow keys
LEFT
or
RIGHT
.
Fig. 15 Measurement screen
6.2
Preparation for the measurement
Before making a measurement, the desired measurement parameters must be set in the menu.
These include the measuring unit, the parameter, the unit and, depending on the application, the
ISO evaluation or max value.
E
n
g
li
s
h
Summary of Contents for PCE-VT 3800
Page 2: ...PCE Instruments...
Page 6: ......
