3 Cleaning
3.3 Cleaning of Endoscopic Probes
en
Instructions For Use
LED BORESCOPE PCE-VE 700
| 17 - Feb - 2016 | Version: 0
Page 19 of 28
3.3
Cleaning of Endoscopic Probes
Cleaning the probe
NOTICE!
Sensitive optical, mechanical and electronic components. Damage
resulting from rough handling. Handle the device with appropriate care. Do not
bump or drop the product. Do not kink or pinch the probe; do not press the tip of
the probe against or past any immovable object.
Proceed as follows:
1. Clean the probe with a soft cloth that has been slightly moistened with a
cleaning solution. Do not use any metal brushes, abrasives or solvents.
When using cleaning agents, be sure to follow manufacturer specifications
and also make sure that the cleaning substances are suitable for using on the
probe.
Remove any debris or soiling from optical surfaces using a swab dipped in al-
cohol (70 % ethanol).
2. Use clear water to rinse the rest of the cleaning agent off.
3. Dry the components with a soft cloth.
Completed!
Summary of Contents for PCE-VE 700
Page 27: ......
