© PCE Instruments
4
2.5
Delivery contents
1 x multifunctional moisture meter PCE-MMK 1
1 x measuring cap for self-test
1 x measuring cap for external electrodes
1 x ram electrode, 1 x penetration electrode, 1 x paper electrode
2 x 30 mm measuring tips, 8 x 30 mm needles, 2 x 80 mm needles, 2 x 150 mm measuring tips
2 x 300 mm extension
2 x 10 mm needles (replacement for internal electrodes)
1 x user manual
3
Switching on/off
To switch on the device, press the [MODE] key for 2 seconds. The display will show the ambient
temperature, a diagonal scale from 0 to 60 % and the moisture value 0.0 %. Below this, there is
a horizontal scale with the marking DRY / MOIST / WET. At the very bottom of the display, you
will see the indication WOOD W1 for woods of group 1 which is selected as standard material.
Press the [MODE] key again for 2 seconds to switch off the unit. If you do not press any button
within 3 minutes, the unit will switch off automatically to conserve battery power.
4
Device settings
Briefly press the "SET" and "CLR" keys simultaneously to open the settings menu. Use the
"MODE" key to select one of the menu items. Then change the values with the "SET" or "CLR"
key.
Set temperature Set dry index
Set wet index
Set light mode
Set temp unit