Manual
13
5.2.3 Setting the drying temperature
After selecting the measurement / stop mode, the temperature indication will flash in the upper side of the
display.
You can set the drying temperature using the arrow keys
and
. The first setting can be made in
steps of 10 %. After confirming with the
key, the setting can be carried on in increments of 1 °C.
ATTENTION:
During temperature regulation, temperature fluctuations of approx.. 4 °C can occur. Mind
this when selecting the temperature to make sure the sample does not scorch. Otherwise, the moisture
reading will be falsified.
5.2.4 Setting the drying / measuring time
(only in time stop mode)
Depending on the previously set measurement / stop mode, the time indication flashes in the upper side
of the display.
The drying / measuring time can be set using the arrow keys
and
.
To confirm the set drying / measuring time, press the
key.
ATTENTION:
The
maximum
drying / measuring time you can set is
99 minutes
.
