© PCE Instruments
5
4.2
Battery replacement
This Instrument is powered by two AA batteries (IEC LR6).
Warning
To avoid electrical shock or personal injury:
•
Remove all test leads before opening the battery cover.
•
Close the battery cover and tighten the screw before using the device again.
Note
•
New and old batteries should not be mixed.
•
Make sure to match the polarity of the batteries with the polarity on the device.
•
Remove the batteries if the device is not to be used for a prolonged period of time.
•
Dispose of the old batteries according to local regulations and law.
Replace the batteries as follows (refer to Figure 3.1):
•
Remove all test leads before opening the battery cover.
•
Remove the device protector.
•
Remove the battery cover by unscrewing the screw with a screwdriver.
•
Replace with two new batteries;
•
Reinstall the battery case, tighten the screws and replace the device protector.
Figure 3.1
Battery replacement
