© PCE Instruments
9
6.1.3
Calibration
"Add "
Creates a new calibration
"Delete" Deletes the selected calibration
"Edit "
Edit the calibration
Adjusting the name, length and length unit
Place a dimensioned object under the microscope, for example a ruler. Open the drawing menu,
click on "Add" in the lower area. Select 2 points to set a distance on the display.
To open the menu again, move the mouse to the left edge of the screen.
Click on "Length" and enter the actual length between the two points. To complete the calibration,
click on "Done".
Note that a calibration is only valid for a certain focus.
If the focus changes, a new calibration is required.
6.1.4
Light settings
Automatic exposure
Adjusts the exposure if the resulting image is overexposed or underexposed.
Reset
Resets the light settings.
Target brightness
Setting for automatic exposure.
