Manual
46
7.5.3
View measurement results
To view the measurement results, press
in the main menu screen of the program.
Functions in this window
Shortcuts in this window
-
Overview of
measurement results
and Soft Foot
Measurement corrective
values
-
Entry of shaft tolerances
-
Entry of thermal growth
-
Save the results
Set tolerances for the current
coupling.
Note: The entered tolerances are
always valid for the left shaft or
machine.
Set thermal growth.
Note: The values for the thermal
growth are always valid for the
left shaft or machine.
Zoom-in
Zoom-out
Define the current machine as
reference machine.
Save results to a file (see
chapter 10 “Handling of the
Data Dialogue window”
)
Open pop-up menu
Scroll left
Scroll right
Exit program
Symbols and status in this window
If a red square appears on the machine place, it means that the
entered dimensions or the evaluated data are not valid (or no data
were acquired):
A magenta coloured shaft marks the stationary machine (reference
machine).
Measurement unit
Green checkbox appears, if all
dimensions were entered and
data was acquired
Current coupling
number
If the field is magenta
shaded, the values
are inadmissible
(cannot be 0)
