Manual
43
7.4.2
Change parameters
Press
, to change parameters.
What should be noted in this window
Shortcuts in this window
Only use the Biaxial Live function
with stable shaft positions, because
even the smallest rotations can lead
to measurement errors
Activate/deactivate manual data entry
Functions in this window
Activate/deactivate manual angle entry
-
Manual entry or use of the sensor data
-
Manual angle entry
-
Selection between 2 or 3 decimal
digits
-
Selection between inch and mm as
measurement unit
-
Activate/deactivate Biaxial Live
Alignment
Select 2 or 3 decimal digits
Select mm or inch as measurement unit
Activate/deactivate Biaxial Live Alignment
Entry for averaging
Save and exit
Filter (averaging) settings
Push
to confirm the entry.
