© PCE Instruments
11
E
n
g
lis
h
1
Safety notes
Please read this manual carefully and completely before you use the device for the first time.
The device may only be used by qualified personnel and repaired by PCE Instruments
personnel. Damage or injuries caused by non-observance of the manual are excluded from our
liability and not covered by our warranty.
The device must only be used as described in this instruction manual. If used
otherwise, this can cause dangerous situations for the user and damage to the meter.
The instrument may only be used if the environmental conditions (temperature,
relative humidity, …) are within the ranges stated in the technical specifications. Do
not expose the device to extreme temperatures, direct sunlight, extreme humidity or
moisture.
Do not expose the device to shocks or strong vibrations.
The case should only be opened by qualified PCE Instruments personnel.
Never use the instrument when your hands are wet.
You must not make any technical changes to the device.
The appliance should only be cleaned with a damp cloth. Use only pH-neutral
cleaner, no abrasives or solvents.
The device must only be used with accessories from PCE Instruments or equivalent.
Before each use, inspect the case for visible damage. If any damage is visible, do not
use the device.
Do not use the instrument in explosive atmospheres.
The measurement range as stated in the specifications must not be exceeded under
any circumstances.
Do not touch the heating element or put your hand into the water when the heating
element is turned on. During operation, do not touch the tank. This can cause burns.
When opening the door, hot and humid air leaks from the device.
Do not place any electrical equipment in or on top of the cabinet.
Make sure that the power plug is disconnected before cleaning the water tank or
changing the water.
Wait for the water to cool down before changing it.
Mind possible consequences of the leaking water vapour. Condensed water might
affect the safety or the functionality of other devices. It might also cause damage to
walls, ceilings or floors over time. Wet floors also become slippery.
Wear proper safety equipment when using the device, especially gloves.
Make sure that the samples are fastened properly.
Only open and close the door by using the handle.
Place the cabinet on an even surface. Use the adjustable feet and a water level to
level it properly.
Place the cabinet in an area with as little draft as possible. Do not place it in high-
traffic areas in order to minimize draft.
Non-observance of the safety notes can cause damage to the device and injuries to
the user.
We do not assume liability for printing errors or any other mistakes in this manual.
We expressly point to our general guarantee terms which can be found in our general terms of
business.
If you have any questions please contact PCE Instruments. The contact details can be found at
the end of this manual.
