© PCE Instruments
39
Eng
li
s
h
14.4
Cloud service
In the "Cloud service" area, you can see an overview if you have registered with an account. In
the overview, you can see how many accounts are registered in this software client and how many
measurements have been saved. You can also see when you last synchronised and when the
last change was made to the data.
14.5
Connect photometer
Via this menu item, you can connect your photometer to your software. To establish a connection,
Bluetooth must be activated in the menu of the device (see chapter 9.1.2 Bluetooth). Then press
the "scan" button in the app and the device should appear in the selection below the button. Now
you can connect the meter to the software / app via the "Connect" button that appears in the
selection. In Windows, when connecting the device to the software for the first time, you must pair
the photometer with Windows in the Windows Bluetooth settings. Afterwards, the search for the
device in the software will show a result. Proceed as follows:
1.
Enter the keyword "Settings" in the search bar.
2.
The first result should be the app "Settings" which can be used to configure the
Windows settings. Open it.
3.
Click on the chapter "Devices".
4.
Now click on the first button "Add Bluetooth or other devices".
5.
Enable the Bluetooth function of your PCE-CP X0 as described in 9.1.2 Bluetooth.
6.
In Windows
, click on “Bluetooth“.
7.
Windows will now search for Bluetooth devices in its environment. Select the meter
which should appear with the name "PCELab" and pair it with your PC.
8.
Now open the software and start a search in the "Connect photometer" area. The
photometer should now also be available here.
After connecting the meter, the following device data will be displayed:
•
Name of the meter
•
Serial number
•
Firmware version
•
Memory usage
•
Time on the meter
The contrast of the display can also be adjusted in this screen. To do this, use the two buttons
"Decrease" and "Increase" below the heading "LCD contrast".
If you no longer need the instrument to be connected to the software, click on the "Disconnect"
button at the bottom of the window to terminate the connection.
14.6
Chemistry
In this main menu item, you will find various calculators which are especially intended for use in
water/pool maintenance. There is one calculator each for the RSI/LSI index, for active chlorine
and for different water care products. Furthermore, there is a list of the ideal ranges of all
parameters measurable by the PCE-CP Series.
