Manual
17
8.2
System setup
8.2.1
Language option
Here you can choose the language of the instrument. You may choose between English, Chinese,
Portuguese, Turkish and German. Use the arrow keys to choose and the “ENTER” key to confirm.
8.2.2
Sound
Here you can choose what sounds the instruments is supposed to make. Make your choice with the
arrow keys and confirm with “ENTER”.
8.2.3
Battery manager
You have got two options here. If “ON” is ticked, the instrument switches itself off after 30 minutes of
inactivity. If the option “OFF” is ticked, the instrument changes to Standby-mode in case of inactivity.
Make your choice by using the arrow keys and confirm with “ENTER”.
8.2.4
Display
Here the contrast of the display can be set. Use the right / left arrow keys to move the slide control.
Confirm your choice with “ENTER”.
8.2.5
Date
You can set time and date here. The following settings can be made: year, month, day, hour, minute and
weekday. Choose the correct field with the arrow-up and arrow-down keys and put in the correct settings,
using the left and right arrow keys. Confirm your entered data using the “ENTER” key.
8.2.6
Restore default
Here you can restore the factory settings. Please enter the password (standard: ”888888”) and press
“ENTER”. Then press “ENTER” again to confirm the reset. Press the “MENU” key to cancel.
Note: All data is going to be deleted. This includes calibration details, settings and measured data.
8.3
Save setup
8.3.1
Autosave
Here the automatic storage function can be activated or deactivated. You one option and confirm by
pressing “ENTER”.
8.3.2
Result display
Here you can review the saved data. The values are assorted by their numbers. With the up / down keys
you can scroll through the values. By pressing “ENTER” you can open one slot to get detailed
information.
If you need information on one specific slot number, press “SCALE”. A search window will appear. Insert
the number you are looking for using the arrow keys and confirm your choice with “ENTER”.
8.3.3
On-line operation
Here you can activate the data transmission to a PC. Choose an option by using the arrow keys and
confirm with “ENTER”.
8.3.4
Part deletion
Here you can choose and delete the storage slots. Use the arrow keys to choose the storage slot and
press “ENTER” to choose one slot. If you have chosen all slots, press “SCALE” and confirm by choosing
“YES” and pressing “ENTER” afterwards.
8.3.5
All deletion
Here you can delete all measured data. Press “ENTER” to confirm and “MENU” to cancel.
Note: This procedure may take some minutes.
