background image

 Mainboard User’s Manual

This publication, including all photographs, illustrations and 
software, is protected under international copyright laws, with all 
rights reserved. Neither this manual, nor any of the material 
contained herein, may be reproduced without the express written 
consent of the manufacturer.
The information in this document is subject to change without 
notice. The manufacturer makes no representations or warranties 
with respect to the contents hereof and specifically disclaims any 
implied warranties of merchantability or fitness for any particular 
purpose. Further, the manufacturer reserves the right to revise this 
publication and to make changes from time to time in the content 
hereof without obligation of the manufacturer to notify any person 
of such revision or changes.

Trademarks

IBM, VGA, and PS/2 are registered trademarks of International 
Business Machines.
Intel, Pentium, Pentium-II, Pentium-III, MMX, and Celeron are 
registered trademarks of Intel Corporation.
Microsoft, MS-DOS and Windows 95/98/NT/2000 are registered 
trademarks of Microsoft Corporation.
Sound Blaster is a trademark of Creative Technology Ltd.
PC-cillin and ChipAwayVirus are trademarks of Trend Micro Inc.
AMI is a trademark of American Megatrends Inc.
A3D is a registered trademark of Aureal Inc.
SuperVoice is a registered trademark of Pacific Image 
Communications Inc.
MediaRing Talk is a registered trademark of MediaRing Inc.
3Deep is a registered trademark of E-Color Inc.
Other names used in this publication may be trademarks and are 
acknowledged.

Copyright © 2001

All Rights Reserved

M754+ Series, V3.3

A163X/April 2001

Summary of Contents for M754 Plus Series















































Reviews: