Model Number
3501B1220KG
PIEZORESISTIVE ACCELEROMETER
Revision: C
ECN #: 47477
[7]
Performance
ENGLISH
SI
Sensitivity(± 50 %)(at 10 VDC excitation)
0.010 mV/g
0.001 mV/(m/s²)
[1]
Sensitivity
0.001 mV/V/g
0.0001 mV/V/(m/s²)
Measurement Range
± 20 kg
± 196,100 m/s² pk
Frequency Range(± 1 dB)
0 to 10,000 Hz
0 to 10,000 Hz
Resonant Frequency
>60 kHz
>60 kHz
Damping Ratio
5 % Critical
5 % Critical
[5]
Non-Linearity(per 10,000 g (98,100 m/s²))
≤
1 %
≤
1 %
Transverse Sensitivity
≤
3 %
≤
3 %
Environmental
Overload Limit(Shock)
± 60,000 g pk
± 588,000 m/s² pk
[4]
Overload Limit
(Mechanical Stops)
≥
30 kg
≥
294,200 m/s² pk
Temperature Range(Operating)
-65 to 250 °F
-54 to 121 °C
Temperature Coefficient of Sensitivity
-0.11 %/°F
-0.20 %/°C
[5]
Zero g Offset Temperature Shift
± 10 mV
± 10 mV
[6]
Base Strain Sensitivity
0.10 g/µ
ε
0.98 (m/s²)/µ
ε
[5]
Magnetic Sensitivity
10 µg/gauss
0.98 (m/s²)/Tesla
[5]
Electrical
Excitation Voltage(Maximum)
15.0 VDC
15.0 VDC
Current Consumption
<3 mA
<3 mA
Input Resistance(± 2000 Ohm)
6000 Ohm
6000 Ohm
[1]
Output Resistance(± 2000 Ohm)
6000 Ohm
6000 Ohm
[1]
Offset Voltage
-40 to +40 mVDC
-40 to +40 mVDC
[1]
Settling Time
0.01 sec
0.01 sec
[2]
Electrical Isolation(Case)
≥
10
7
Ohm
≥
10
7
Ohm
[3]
Physical
Sensing Element
Piezoresistive MEMS
Piezoresistive MEMS
Sensing Geometry
Full Active
Full Active
Housing Material
Titanium
Titanium
Sealing
Epoxy
Epoxy
Size (Hex x Height)
3/8 in x .50 in
3/8 in x 12.7 mm
Weight(without cable)
0.088 oz
2.5 gm
[5]
Electrical Connector
Integral Cable
Integral Cable
Electrical Connection Position
Side
Side
Cable Type
096 4-cond silicone jacket
096 4-cond silicone jacket
Cable Termination
Pigtail Ends
Pigtail Ends
Cable Length
10 ft
3.05 m
Mounting
Integral Stud
Integral Stud
Mounting Thread
1/4-28 Male
1/4-28 Male
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
M
- Metric Mount
Mounting Thread
M6 x 0.75 Male
M6 x 0.75 Male
NOTES:
[1] Verified with test data provided on supplied calibration certificate.
[2] Settling Time is the maximum time after power-up for the Offset Voltage to be /-2% of
Measurement Range output of the final offset value. Mounting surface must be at thermal
equilibrium.
[3] Individually tested to ensure compliance with specified value.
[4] Half-sine pulse duration,
≥
20 µsec.
[5] Typical.
[6] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[7] See PCB Declaration of Conformance PS151 for details.
SUPPLIED ACCESSORIES:
Model ACS-62 Shock Pulse Calibration of single axis piezoresistive shock accelerometer to
maximum amplitude of 5k g, 10.0 VDC excitation
Entered: LK
Engineer: JS
Sales: RWM
Approved: JJB
Spec Number:
Date: 11/28/2017 Date: 11/28/2017 Date: 11/28/2017 Date: 11/28/2017
65013
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]
