M755LMR Mainboard User’s Manual
34
Features Setup Page
This page sets some of the parameters for peripheral devices
connected to the system.
AMIBIOS SETUP – Features SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
OnBoard FDC
Enabled
OnBoard Serial PortA
3F8h/COM1
OnBoard IR Port
Disabled
OnBoard Parallel Port
378h
Parallel Port Mode
Normal
Parallel Port IRQ
7
Parallel Port DMA
N/A
OnBoard Game Port
Auto
OnBoard MIDI Port
300h
MIDI Port IRQ
10
OnBoard PCI IDE
Both
Ultra DMA Support
Disabled
OnChip Audio
Enabled
OnChip Modem
Enabled
OnBoard LAN
Enabled
USB Function
Enabled
USB Function for DOS
Disabled
ESC : Quit
↑↓←→
: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load Optimal values
F7 : Load Best performance values
OnBoard FDC
Use this item to enable or disable the onboard
floppy disk drive interface.
OnBoard Serial
PortA
Use this item to enable or disable the onboard
COM1 serial port, and to assign a port address
OnBoard IR Port
Use this item to define the protocol for an
infrared port if you have installed an optional IR
port. The choices are IrDA and ASKIR.
Onboard Parallel
Port
Use this item to enable or disable the onboard
LPT1 parallel port, and to assign a port
address. The Auto setting will detect and
available address.
Parallel Port Mode
Use this item to set the parallel port mode. You
can select SPP (Standard Parallel Port), ECP
(Extended Capabilities Port), EPP (Enhanced
Parallel Port), or ECP + EPP.
Parallel Port IRQ
Use this item to assign either IRQ 5 or 7 to the
parallel port.
Parallel Port DMA
Use this item to assign a DMA channel to the
parallel port. The options are 0, 1 and 3.
