DXP-3800D
- 15 -
LNB 22KHz
To activate the LNB 22KHz control signal to the
LNB, user can select between On and Off.
DiSEqC
To configure the DiSEqC control, user can select
Port A, Port B, Port C, Port D or DiSEqC OFF.
CI
CI-1(~8)
CI CAM Name
To check what kind of CAMs have been inserted.
CI Setup
To set which programs should be descrambled by
CI slot1 or CI slot2.
BISS
BISS-1(~8)
BISS Mode
To select the BISS mode, user can choose
between Off, BISS-1 and BISS-E.
ID and Key
Input Key value in BISS-1 mode and input ID and
Key in BISS-E mode.
Program
To select which services will be decrypted by
BISS.
Remux
Program select
To setting Remux.
Bit Rate
To set the Max bit rate of the Remux output.
Packet Size
To choose 188Byte or 204Byte for the Packet
Size.
TS ID
To set the TS ID.
Remove CA
To choose Off or On for the Remove CA
Insert EIT
To choose Off or On for the Insert EIT
ON ID
To configure the Original Network ID.
Output Program
To select which services will be output by Remux.
TS/IP
Bypass
ASI Out
Bypass
5.1.5 System menu
In this menu, you can check and set system settings and read the equipment information, and make
the default factory setting and so on. There are nine submenus, including Version Info, IP Control,
Product Name, Model, Factory Settings, Machine Type, LCD Language, Safety Level, and Upgrade.
Use UP or DOWN key to scroll the submenu, and press ENTER to go into each submenu.
●
Network Setting
●
Product Name
●
Version
●
Factory Settings