background image

U

SER’S 

I

NFORMATION 

M

ANUAL

S

ERIES 

GM G

AS 

B

OILERS

TO THE  INSTALLER:

This manual is the property of the owner and must be affixed near the boiler for
future reference.

TO THE  OWNER:

This boiler should be inspected annually by a Qualified Service Agency.

TO BE COMPLETED BY THE INSTALLER

Service Agency

Phone No.

Address

Boiler Model No. GM-

Serial No.

Date of Installation:

If the information in this manual is not followed
exactly, a fire or explosion may result causing
property damage, personal injury or loss of life.

W

WA

AR

RN

NIIN

NG

G

– Do not store or use gasoline or other flammable vapors

and liquids in the vicinity of this or any other appliance.

–  WHAT TO DO IF YOU SMELL GAS

Do not try to light any appliance.

Do not touch any electrical switch;

do not use any phone in your building.

Immediately call your gas supplier from a neighbor’s
phone. Follow the gas supplier’s instructions.

If you cannot reach your gas supplier, call the fire
department.

– Installation and service must be performed by a qualified

installer, service agency or the gas supplier.

GM8070 R3 (10/06-1M)

Printed in U.S.A.

PB HEAT, LLC

PO BOX 447 • NEW BERLINVILLE, PA 19545-0447

Summary of Contents for Series GM











Reviews: