Paxar 9462TM Operating Instructions Download

Page: 1 / 4

TC9462OI Rev. AE 4/06

O P E R A T I N G
I N S T R U C T I O N S

The Monarch® 9462™ Single-Station Battery Charger
charges one 7.4V lithium-ion battery at a time for the
following printers:

♦

Sierra Sport2™ 9460™

♦

Sierra Sport3™ 9433™

♦

Monarch® Pathfinder® Ultra®

Silver

6032™

♦

Monarch® Pathfinder® Ultra®

Gold

6037™

♦

Monarch® Pathfinder® Ultra®

Platinum

6039™

Note:

You must charge a battery before using it.

WARNINGS

♦

Use only a Paxar-qualified battery.The battery could
be damaged or explode if placed on a different
charger.

♦

Do not charge non-rechargeable batteries in this
charger.

♦

Do not throw the battery in the trash. Dispose
according to your local regulations.

Summary of Contents for 9462TM

Page 2: ...ifications listed at the end of these instructions Otherwise the battery may permanently lose its charge capacity Setting Up the Equipment To set up the equipment 1 Plug one end of the power supply into a wall electrical outlet 2 Plug the other end of the power supply into the back of the charger The Power LED is lit when the charger is set up and plugged in ...

Page 3: ...t takes approximately 1 hour to reach the 80 level where it is now usable To reach 100 it takes approximately 2 hours more Reading the Display Power LED on solid Charger is plugged in Charging LED flashes when you insert the battery on solid during charging off when charging is complete Complete LED flashes when the battery is 80 charged on solid when the battery is 100 charged ...