5. Cautions of installation and usage
1
）
Avoid exposing the terminal in hot, humid,dusty or strong
electromagnetic
environment.
2
）
Do not violently vibrate, shake or beat the product.
3
）
Do not plug/unplug any units of the product when it is power on, otherwise it may
damage the internal circuit.
4
）
Do not maintain the terminal if you are non-professional
5
）
Before inserting the magnetic stripe/IC/contactless card, please check whether there is
any
foreign object
inside or surround the card slot , and if any , report to related personnel.
Caution
Risk of explosion if battery replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Hereby, PAX Computer Technology (Shenzhen) Co., Ltd. declares that the radio equipment
type E600 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
address
：
http://www.pax.com.cn/ProductCE.aspx
Icon shows
RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic
equipment (WEEE). This means that this product must be handled pursuant to European
directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the
environment.
User has the choice to give his product to a competent recycling organization or to the
retailer when he buys an new electrical or electronic equipment.
The symbol indicates DC voltage
FCC COMPLIANCE STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1.
this device may not cause harmful interference, and
2.
this device must accept any interference received, including interference that may
cause undesired operation.
Warning
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can