few seconds.
Swipe the magnetic stripe card:
Place the magnetic stripe face down (keep the magnetic
stripe card perpendicular to the main display), swipe card through the magnetic card slot at a
constant speed.
IC Card:
Place the IC chip face down, then insert the IC card into the card slot, and push it to
the end.
Contactless card:
Put the contactless card on the center of the payment module screen.
Tear paper:
Press the print paper downward along the cutter and tear it leftward or rightward
when getting close to the main display.
Charge:
Insert the external adapter or the base to charge the device, the indicator lighting in
red means the device is charging; the indicator lighting in green means charging is completed;
the indicator flashing in red and green alternately meanscharging is abnormal.
Replace SIM card:
Open the battery cover on the bottom of the machine,remove the battery,
and follow the prompt to insert/take out the SIM card.
Replace SD card:Open the battery cover on the bottom of the machine, remove the battery, and
follow the prompt to insert/take out the SD card.
4, Specification
Operating System: Android 7.1
CPU: Cortex A53Qaud-core, 1.4GHz
Memory: 1GB RAM + 8GB Flash Memory
Display: 8" inch, resolution:800*1280, multi-touch capacitive touch screen
Printer: 2" high-speed thermal printer, support 58*50mm print paper roll
Audio: Built-in speaker, support headphone output
Camera: Front camera, 5 mega-pixel, fixed-focus, high-speed code scanning
Rear camera,30W-pixel,fixed-focus, high-speed code scanning
L-Sensor (Ambient Light Sensor): Automatically adjust the backlight brightness of the main
display
Wireless Communication: Support WIFI, Bluetooth, 3G/4G
Positioning: Support GPS, Compass, Gingileo, GLONASS
Card Slots: SIM card slot
Micro SD card slot
（
maximum supports 128GB
）
magnetic stripe card/IC card slot, using two-in-one
（
support MAG&ICC
）
Magnetic Card Reader: Support track 1/2/3.
IC Card Reader: Conform to the standard of ISO7816, EMV2000 L1&L2, PBOC3.0
Contactless Card Reader: Compatible with ISO14443 Type A&B
Working Environment
Temperature: 0
℃～
50
℃
(32
℉～
122
℉
)
R.H.: 10%
～
93%( non-condense)
Storage Environment
Temperature:-20
℃～
70
℃
(-4
℉～
158
℉
)
R.H.:5
％～
95
％
(non-condense)