Roman Arc Cypress
Hammock Stand
INSTRUCTIONS
Made in the
USA
NOTE: TWO PERSON ASSEMBLY SUGGESTED
Quantity per hardware pack (1 per box, 2 packs needed for full assembly)
(5) HEX NUTS
(8) FLAT WASHER
(2) CARRIAGE BOLT
HARDWARE PACK
• CENTER BEAM (WITH FOUR COUNTERSUNK HOLES)
• FOOT BEAM (SHORTEST BEAM)
• END BEAM (WITH ROMAN ARC BRASS TAG)
The hammock stand is shipped in two boxes. Stand parts and
hardware pack contents listed below are per box. Stand parts and
hardware packs from both boxes are required for assembly.
STAND PARTS
• RATCHET OR PLIERS (not included)
• SCREW DRIVER (not included)
• 1 (9/16”) DEEP WELL SOCKET TOOL (included in each hardware kit)
SUGGESTED TOOLS
• Lightly sand once a year and add a coat of boiled
linseed oil to keep the cypress wood in good condition.
CARE INSTRUCTIONS
(2) HEX BOLTS
(3) PLASTIC CAPS TO COVER BOLT ENDS
(1) EYE BOLT
