Congratulations on purchasing this Durawood Essentials
or Sunrise Dining Chair! You’re going to love the quality,
durability and simple assembly
—
plus the full Residential
Lifetime Warranty.
QUESTIONS REGARDING THIS PRODUCT?
Call our customer-service line toll-free at (800) 643-3522.
HARDWARE PACK
Before beginning assembly, make sure you have all parts. Note that
not all parts pictured are to scale.
10 - 1.5" Barrel Bolts
REQUIRED TOOL
(NOT PROVIDED)
•
Standard Phillips Head Screwdriver
USING BARREL BOLTS
EXTREMELY
IMPORTANT:
Use
ONLY
a Standard
Phillips Head
Screwdriver to
tighten Barrel
Bolt Assemblies;
using a drill can
strip the Barrel
Bolt head,
marring the
appearance of
your chair.
then
To correctly thread Barrel Bolts to Bolt Fasteners:
Fit the Fastener over the bottom of the Bolt,
turning the Fastener at first counterclockwise,
until you hear a slight click, then begin
tightening clockwise as you normally would.
ASSEMBLY INSTRUCTIONS on back of page; Residential Lifetime Warranty, back of page
Durawood
Essentials
& Sunrise
Dining Chair
essentials
chair back
sunrise
chair back
sunrise
essentials
right
leg
CHAIR
PARTS
left
leg
PEG
HOLE
FACING
UP
PEG
HOLE
FACING
UP
bottom
chair frame
chair seat
Your Durawood Furniture comes with several
pegs to increase sturdiness. Wherever you
find a peg hole, insert peg. You may need to
use a small mallet to tap the plug into place.
x6
x1
x10
x4
Assemblies
4 - 1 5/8" screws
6 - Pegs
1 - Allen Wrench
1 - #2 Square Bit
Hardawre pack
weight 7.8
8
oz
