1 General Information
4
993x0463x-mub-en – V02
2020/03
1
General Information
Carefully read these instructions before installation and commissioning.
Save these instructions in the vicinity of the installation for future reference.
1.1
Scope of these instructions
These instructions describe the installation, commissioning, function and the operation of the
mixed HeatBloC
®
K33R DN 25 and DN 32.
For other components of the installation, such as the pump, the controller or the modular
distribution manifold, please observe the instructions of the corresponding manufacturer.
The chapters called [specialist] are intended for specialists only.
1.2
Designated use
The HeatBloC
®
may only be used in heating circuits taking into consideration the technical limit
values indicated in these instructions.
The HeatBloC
®
must not be used in drinking water applications.
Improper usage of the HeatBloC
®
excludes any liability claims.
This product complies with the relevant directives and is therefore labelled with the CE mark.
The Declaration of Conformity is available upon request, please contact the manufacturer.
Only use PAW accessories with the HeatBloC
®
.
The packaging materials are made of recyclable materials and can be disposed of with
recyclable materials.
