3.
While holding front rim of shaver, fit
notches on locking cap between tabs on
shaver. Turn locking cap clockwise until it
locks into place.
SHAVER
NOTCH
NOTCH
TAB
LOCKING
CAP
TAB
4.
Insert the plunger into chute.
PLUNGER
CHUTE
2.
Fit shaver handle into hole in back
of Sno-Cone Maker so that notches
on the handle fit over tabs on
shaver.
TABS
SHAVER
SHAVER HANDLE
NOTCHES
1.
Fit small end of shaver through hole in
front of Sno-Cone Maker as shown.
VERY IMPORTANT – INSERT SHAVER
THROUGH FRONT OF MAKER ONLY
SMALL END
Includes: Paw Patrol Sno-cone Maker, Plunger, Ice
Shaver, Hand Crank, Locking Cap, Bottle with Cap,
Spoon, 3 Paper Cups, 1 Plastic Cup.
Note to Parents:
• Read instructions thoroughly before use.
• Adult supervision is suggested with younger children.
Not intended for children under 3 years.
• Handle Sno-cone maker with care.
CLEANING INSTRUCTIONS:
Wash thoroughly before use.
After each use, remove the shaver handle from the unit
and rinse all parts with warm (not hot) soapy water.
Thoroughly clean out any water left in the toy. Wipe dry.
Do not wash in the dishwasher.
CHOKING HAZARD
-
Small parts
Not for children under 3 yrs.
WARNING:
This item contains a functional
sharp edge on the ice shaver
CAUTION:
Ages 4 and Up
Sno-Cone
Maker
