PF250 English
Size : 143 x 107mm
(USA)
6
WAKE TO ALARM
SNOOZE ALARM
1.
Set the FUNCTION selector to the ALARM position. The ”ALM” indicator will light up to
confirm that the alarm is set.
2.
At the selected wake up time the alarm will beep. It will continue for about two hours
and then shut off automatically.
3.
To stop the beep sooner, press the ALARM button. The beep will stop but the alarm
remains set and will turn the beep on again at the same time on the following day.
4.
If you do not want the alarm to turn the beep on the following day, set the appropriate
FUNCTION selector to the 'OFF' position.
After the radio or alarm sounds in the morning you may press the SNOOZE button for a few
more minutes sleep. The alarm will stop for approximately 9 minutes and then turn on again.
You can program the sleep timer to play the radio for up to 1 hour 59 minutes and then shut
off automatically.
1.
Press the SLEEP button. The display will briefly show "0: 59". While holding the SLEEP
button press the HOUR button, the display shows "1: 59" and the radio will begin to play.
After 1 hour 59 minutes the radio will shut off automatically.
2.
To adjust the amount of time that the radio will play before shutting off, hold the SLEEP
button. Then press MINUTE button to adjust the desired amount of before shutting off.
When the desired amount of sleep time appears on the display, release the buttons.
3.
To cancel the sleep timer before it counts down to "00" and shuts the radio "off"
automatically, press the SNOOZE button.
IMPORTANT:
Remember that the station and volume settings you choose for the “Sleep To Music” operation
are the same settings you will hear if you set the alarm for “Wake To Radio” the following
morning.
SLEEP TO MUSIC TIMER
SLEEP OPERATION