PF250 English
Size : 143 x 107mm
(USA)
5
1.
Set the BAND selector to the desired band, AM or FM.
2.
Set the VOLUME control to a low setting.
3.
Slide the FUNCTION switch to the ON position.
4.
Select your desired station with the TUNING control.
5.
Adjust the VOLUME control to the desired setting.
6.
When you are finished listening, slide the FUNCTION selector to OFF position to turn the
radio 'Off'.
Slide the FUNCTION selector to ON and select the band, station, and volume level
that you wish to hear when the alarm comes 'On', then slide the FUNCTION
selector to AUTO position.
Reconfirm the wake up time settings by pressing the ALARM button.
At the selected wake up time the radio will turn 'On'. It will play for about two hours
and then shut off automatically.
To stop the radio sooner, press ALARM button. The radio will stop but the alarm
remains set and will turn the radio on again at the same time on the following day.
If you do not want the alarm to turn the radio on the following day, set the
FUNCTION selector to the 'OFF' position
1.
2.
3.
4.
5.
WAKE TO RADIO
LISTENING TO THE RADIO
ANTENNA INFORMATION
AM - The AM bar antenna is inside the cabinet. If AM reception is weak, change the
position of cabinet until the internal antenna picks up the strongest signal,
FM - The FM antenna is built in the unit. If FM reception is weak try varying the position of
the radio until you find the strongest signal.
ALARM OPERATION