WAN Interface (if applicable)
56
SmartNode 5550 & 4150 Series User Manual
B
• Specifications
WAN Interface (if applicable)
Note
For information on configuring the WAN interface, see Chapter 4,
Table 9. WAN Interface Specifications
Factor
Specs
VDSL-ADSL
(/AVA and /AVB models)
• ANSI T1.413 Issue 2
• G.992.1 (G.dmt)
• G.992.2 (G.lite)
• G.992.3 (ADSL2, G.dmt.bit)
• G.992.4 (ADSL2, G.lite.bis)
• G.992.5 (ADSL2+)
• G.993.1 (VDSL)
• G.993.2 (VDSL2)
• G.994.1 (G.hs)
• G.Vectoring
• Annex A, M and L
• Annex B and J
• VDSL Profile up to 30a supported
G.SHDSL-EFM
(/2G and /4G models)
• Support ITU-T G991.2/G.994.1 standards
• Support ITU-T G.998.1 (G.bond)
• TC-PAM line modulation 16,32,64 & 128
• CO or CPE Mode
• IEEE 802.3 2Base-TL (aka 802.3ah) compliant
• Rate negotiating/manually rate adaptation configu-
ration
• 2–8 wire mode auto detect
• Data rate selections: Up to Nx239 (5.7 Mbps) per
pair
• Support bonding based on EFM
• Line interface: up to 4 pairs on a single RJ45 con-
nector
G.SHDSL-ATM
(/2G and /4G models)
• Classical IPoA (RFC 1577/2225)
• PPPoE Client (over ATM) (RFC 2516)
• IPoA (RFC 2684/1483)
• ATM AAL5 encapsulation
• Max. 8 PVCs
• User selectable VC MUX and LLC MUX (default)
• Configurable auto-connection
• ATM QoS: UBR (default), CBR, and VBR-rt, VBR-
nrt, UBR: per VC queuing
• Auto-configuration: TR-037 & ILMI 4.0
