Patton SmartNode 4740 Series User Manual Download Page 44

Page: 44 / 106

Installing the SmartNode 4740

SmartNode 4740 Series (48–128 Ports) User Manual

• SmartNode Installation

Installing AC power cables

Do the following to connect AC power to the Model SN4740 Series:

Note

Do not connect the power cord to the AC power outlet at this time.

Insert the female end of the AC power supply cable to one of the C14 inlets (see

figure 12

on page 26).

Verify that the AC power cable included with your device is compatible with local standards. If it is not,
refer to

“Contacting Patton for Assistance”

on page 52 to find out how to replace it with a compatible

power cord.

Connect the male end of the power cord to an appropriate power outlet.

Note

The SmartNode device does not have a power switch; it powers on when the
power source is activated.

Verify that a green

POWER

LED on the rear panel is lit.

The front panel

POWER

LED will blink quickly during bootloader phase and blink slowly during the boot

process. It will stay lit constantly when the system is up and running.

Repeat steps 1 through 4 to install a power cable to the second C14 inlet.

Congratulations, you have finished installing the SmartNode 4740 Series Gateway! Now go to Chapter 4,

“Ini-

tial Configuration”

on page 46.

Installing DC power source input

Do the following:

Verify that the power source is powered off and that it is compatible with the SmartNode device:

Note

When applying direct DC power, it must be regulated 24–48V VDC ±5%,

150W

for 32 and 64-port devices, and

250W

for 72, 96 and 128-port

devices.

Determine which lead is positive and which lead is negative on the customer-supplied power adapter.

Insert the positive lead into the opening on the terminal block labeled

and the negative lead into the

opening on the terminal block labeled

(see

figure 23

There are no user-serviceable parts in the power supply section
of the model SN4740 Series. Contact Patton Electronics Techni-
cal Support at [email protected] for more information

This device is not intended for use with power supplies
that provide high instantaneous current (for example: lead
acid batteries).

CAUTION

Summary of Contents for SmartNode 4740 Series











































































































Search results

Summary of Contents for SmartNode 4740 Series

Reviews:

Related manuals for SmartNode 4740 Series

Brands by name

Popular brands

Patton SmartNode 4740 Series, User Manual

Search results

Summary of Contents for SmartNode 4740 Series

Reviews:

Related manuals for SmartNode 4740 Series

Brands by name

Popular brands