Patton SmartNode 4740 Series User Manual Download Page 42 | Manualshive

Page: 42 / 106

background image

Installing the SmartNode 4740

42

SmartNode 4740 Series (48–128 Ports) User Manual

3

• SmartNode Installation

Placing the SmartNode device

Install the SmartNode device in a 19-inch rack or place it on a desktop or similar sturdy, flat surface. Allow suf-
ficient space at the rear of the chassis for cable connections. Additionally, you should consider the need to
access the unit for future upgrades and maintenance.

Connecting the 10/100/1000Base-T Gigabit Ethernet LAN and WAN cables

The SmartNode 4740 Series has automatic MDX (auto-cross-over) detection and configuration on the Ether-
net ports. Any of the two ports can be connected to a host or hub/switch with a straight-through wired cable.

1.

Connect to the subscriber port of the broadband access modem (DSL, cable, WLL) to ETH 0/0.

2.

Connect port ETH 0/1 to your LAN.

For details on the Ethernet port pin-out and cables, refer to

Appendix C, “Cabling”

D, “Port pin-outs”

Installing a ground wire on the SmartNode device’s grounding stud

1.

Route the ground wire from a building ground connection to the SmartNode device.

2.

Connect the grounding wire to the grounding stud of the SmartNode device (see

3.

Verify that the resistance of the ground path is less than 0.5 ohms.

To prevent overheating and damaging the unit, proper ventilation
is required when placing the device; leave at least 2 inches (5
cm) to the left, right, front, and rear of the SmartNode device.

The device should be installed in a dry environment with suffi-
cient space to allow air circulation for cooling. Do not stack multi-
ple SmartNode devices directly on top of one another, and do not
place items on top of the device. If you will be installing equip-
ment above the SmartNode device, leave at least 2 inches (5
cm) of clearance between the devices.

Do not work on the system or connect or disconnect
cables during periods of lightning activity.

The Interconnecting cables shall be acceptable for external
use and shall be rated for the proper application with
respect to voltage, current, anticipated temperature, flam-
mability, and mechanical serviceability.

According to UL60950/IEC62368, a connection to earth
ground—using the grounding stud at the rear of the units
(see

)

—is required to protect against

power cross.

CAUTION

WARNING

WARNING

WARNING

«
...
40
41
42
43
44
...
»

Summary of Contents for SmartNode 4740 Series











































































































Reviews:

No comments

Related manuals for SmartNode 4740 Series

Brand: NetComm Pages: 16

MultiConnect Conduit

Brand: Multitech Pages: 37

Brand: WAGO Pages: 76

Brand: Matrix Telecom Pages: 32

Brand: Sollae Pages: 38

Brand: RTA Pages: 78

Fieldgate SWG70

Brand: WirelessHART Pages: 124

Brand: NETGEAR Pages: 7

Brand: Rose Point Pages: 27

Dynalite DTK622-USB

Brand: Philips Pages: 2

Dynalite DMNG232

Brand: Philips Pages: 2

Dynalite DDNI-LON

Brand: Philips Pages: 2

Dynalite DDNG485

Brand: Philips Pages: 2

Dynalite DDNG232

Brand: Philips Pages: 2

Dynalite DDNG100BT

Brand: Philips Pages: 2

Dynalite DDNG-KNX

Brand: Philips Pages: 2

Dynalite DDMIDC8

Brand: Philips Pages: 2

Brand: Philips Pages: 80

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands