Working with Configurations
40
SmartNode 10100 Series User Manual
3 • Initial Setup and Web Management
2.
Click
Edit
next to the system you wish to activate in order to access the
System Configuration
screen.
Figure 33. System List
3.
Activate the configuration and enter a name for the system. Under
Activate Configuration
: Select a Con-
figuration on which to run the system. Click
Activate
.
Note
Make certain that the
Lock Active Configuration
box (located at the top of
the page) is '
unchecked
.’ Failure to do so will prevent the configuration from
being saved.
Figure 34. Name and Activate Configuration