PPP Support
76
OnSite 2701A/I E1/T1 Ethernet Bridge (NTU) User Manual
B
• Specifications
PPP Support
•
Point-to-Point Protocol over HDLC
•
PPPoE (RFC 2516) Client for autonomous network connection. Eliminates the requirement of installing
client software on a local PC and allows sharing of the connection across a LAN.
•
User configurable PPP PAP (RFC 1661) or CHAP (RFC 1994) authentication.
•
PPP BCP (RFC 1638) support for bridged networking support.
Management
•
Web-Based configuration via embedded web server
•
CLI menu for configuration, management, and diagnostics.
•
Local/Remote CLI (VT-100 or Telnet).
•
SNMPv1 (RFC 1157) MIB II (RFC 1213)
•
Logging via SYSLOG, and VT-100 console. Console port set at 9600 bps 8 bits, no parity, 1 stop bit, no
flow control.
Security
•
Password protected system management with a username/password for console and virtual terminal. Sepa-
rate user selectable passwords for SNMP RO/RW strings.
•
Access list determining up to 5 hosts/networks which are allowed to access management system SNMP/
HTTP/TELNET.
•
Logging or SMTP on events: POST, POST errors, PPP/DHCP, IP.
Dimensions
1.58H x 4.16W x 3.75D in. (10.6H x 4.1W x 8.8D cm)
Power and Power Supply Specifications
The OnSite NTU may come with either an AC or DC power supply.
AC universal power supply
The OnSite device offers internal or external AC power supply options.
•
The internal power supply connects to an AC source via an IEC-320 connector (100–240 VAC, 200 mA,
50/60 Hz)
•
The external power supply connects to an external source pro5 VDC via a barrel-type connector
48 VDC power supply
•
Rated voltage and current: 36–60 VDC, 400 mA
•
The DC power supply connects to a DC source via a terminal block
