WAN Service Configuration
37
OnSite 2701A/I E1/T1 Ethernet Bridge (NTU) User Manual
5
• WAN Services
Figure 17. WAN services options
4.
In the Description field, enter the description you wish. This is a mandatory field. Without a description,
you cannot create the WAN service.
Figure 18. PPP bridged configuration
Verify the settings to be:
•
Interface = 1
•
LLC header mode = dialout
•
LLC header mode = off
•
HDLC header mode = on
•
No authentication
•
Leave
User name
and
Password
blank.
Click on
Create
.
Central Site Configuration.
If the central site also has an 2701A, you may configure as described in this sec-
tion. Refer to the web page images for the Remote OnSite configuration above.
In this example, the IP address of interface
ip1
is changed to 192.168.100.3/24.
1.
Bring up the web-page management system on your browser by entering the IP address of the 2701A
