Cable installation
26
Model 6081RC Network Access Server User Manual
2 • Hardware installation
Connecting the 10/100Base-T Ethernet port to an Ethernet switch or hub
The 10/100Base-T Ethernet port (see
on page 25) is designed to connect to an Ethernet switch or
hub. The Ethernet RJ-45 pin and signal definitions for the Network Access Router or for a NIC card in a
workstation/PC are shown in
. Connect a straight-through CAT-5 cable (one wired as shown in
) between the Model 6081RC and the hub/switch.
Figure 8. Ethernet RJ-45 pin and signal definitions for Model 6081RC
Connecting the 10/100Base-T Ethernet port to an Ethernet-capable
workstation or PC
The 10/100Base-T Ethernet port can connect to a single Ethernet-capable workstation or PC by means of a
cross over cable. Refer to
to assemble a cross-connect cable that will connect between the NIC Ether-
net port in the workstation and the Network Access Router 10/100Base-T Ethernet port.
Figure 9. Cross-over RJ-45-to-RJ-45 Ethernet cable diagram