Basic System Management Configuration Task List
80
CopperLink CL2300 User Manual
10
• Basic System Management
Configuring the Web Server
The embedded web server has two parameters that are configurable.
Note
Changing the language parameter does not affect the language of the web
configuration pages.
Mode:
Configure
Step
Command
Purpose
1
device
(cfg)#webserver [http |
https] port
port-number
Start the http or https server, and set the listening port number.
The default port number for the http web server is 80, and the
default port number for the https web server is 443.
Example
: Configuring and starting the Web server
The following example shows how to set the web server language and the listening port of your device, if you
start from the configuration mode.
device(cfg)#webserver http port 80
device(cfg)#webserver http
Restarting the System
In case the CL2300 has to be restarted, the
reload
command must be used. The reload command includes a
two-dialog, where the user is allowed to store any unsaved configuration data and finally confirms the
system
restart.
IMPORTANT
Restarting the system interrupts running data transfers and all
voice calls.
The execution command
reload
has been enhanced with the following option:
•
forced—reloads the system without prompting for confirmation or for saving the running-configuration (no
need to type
yes
or
no
). The question whether to save the running-configuration is automatically answered with
no
, the question whether to reload or not with
yes
.
Mode:
Administrator execution
Step
Command
Purpose
1
device
#reload
Restarts the system
Example:
Restarting the system
The following example shows how to restart the currently running system, if you start from the administrator
execution mode.