
Basic System Management Configuration Task List
76
CopperLink CL2300 User Manual
10
• Basic System Management
Example:
Installing license keys from the console
The following example shows the command used to install license keys manually on the console.
device(cfg)#install license 10011002R1Ws63yKV5v28eVmhDsVGj/JwKqIdpC4Wr1BHaN-
tenXUYF/2gNLoihifacuQDG8LJis6EdW6uNk/GxVObDEwPFJ5bTV3bII8c5OpC-
Cd7PSAe83Ty2c/
CnZPSlEjIrVlJrr8VhOr1DYxktSY+y9sCeXhDWt5Xq15SAPlznTLQmymzltzswX/
KX13sdkR0ub9IX4Sjn6YrvkyrJ2dCGivTTB3iOBmRjV1u
After installing license keys, you can check if the license keys have been added successfully to your system using
the following command.
Mode:
Configure
Step
Command
Purpose
1
device
(cfg)#show licenses
Display all installed licenses
Example:
Displaying installed licenses
The following example shows the command used to display all installed licenses on a system and a sample of its
output.
device(cfg)#show licenses
VPN [vpn]
License serial number: 14343534
Status: Active
device(cfg)#
Setting System Information
The system information includes the following parameters:
•
Contact
•
Hostname
•
Location
•
Provider
•
Subscriber
•
Supplier
By default there is no information specified for any of the above parameters.
System contact information tells the user how to contact the information service, e.g. the help line of the ser-
vice provider. The contact information may be any alphanumeric string, including spaces, that is no longer
than one line. This entry corresponds to the MIB II system sysContact object.
The system name, also called the hostname, is used to uniquely identify the CL2300 in your network. The
selected name should follow the rules for ARPANET hostnames. Names must start with a letter, end with a let-
ter or digit, and have as interior characters only letters, digits, and hyphens. Names must be 63 characters or
fewer. For more information, refer to RFC 1035. This entry corresponds to the MIB II system sysName object.
After setting the hostname of the CL2300 the CLI prompt will be replaced with the chosen name.