Patton CopperLink CL2300, User Manual, Page: 34 / 116

CopperLink Line: Overview 34
CopperLink CL2300 User Manual 4 • CL2300 Bridging Contexts
CopperLink Line: Overview
Configuration details for creating a DSL or Line Connection. Connections can only be made between two
modems. These modems must have manual configurations to create a link.
Description
Annex-type Must match on both modems
Mode Must be opposites
Payload Rate Local Payload Configuration
Service-mode Local Service-mode configuration
CopperLink Line Configuration Parameters
Description
Annex-type Configure annex (must match peer)
Bind Interface, bridge-group
Description text information
Mode local and remote
Payoad-rate “adaptive” “max”
Service-mode 4 wire (2–4–8 wire support)
Snr-margin Max for line connection quality
Tcpam 16/32 64/128
VLAN Configures VLAN interface
Mandatory Configuration List (local sets payload rate)
Description
Mode Local or Remote
Annex type (must match other side)
Bind Must bind CopperLink port to bridge-group or interface
Service-mode Must match
Shutdown
•
Example: Local <–> Remote