WARNING
This device is NOT intended nor approved for connection
to the PSTN. It is intended only for connection to customer
premise equipment.
CAUTION
Electrostatic Discharge (ESD) can damage equipment and
impair electrical circuitry. It occurs when electronic printed circuit
cards are improperly handled and can result in complete or inter-
mittent failures. Do the following to prevent ESD:
Always follow ESD prevention procedures when removing and
replacing cards.
Wear an ESD-preventive wrist strap, ensuring that it makes good
skin contact. Connect the clip to an unpainted surface of the
chassis frame to safely channel unwanted ESD voltages
to
ground.
To properly guard against ESD damage and shocks, the wrist
strap and cord must operate effectively. If no wrist strap is avail-
able, ground yourself by touching the metal part of the chassis.
14
CopperLink CL2300 User Manual
General Observations
•
Clean the case with a soft slightly moist anti-static cloth
•
Place the unit on a flat surface and ensure free air circulation
•
Avoid exposing the unit to direct sunlight and other heat sources
•
Protect the unit from moisture, vapors, and corrosive liquids
Typographical Conventions Used in this Document
This section describes the typographical conventions and terms used in this guide.
General Conventions
The procedures described in this manual use the following text conventions:
Table 1. General conventions
Convention
Meaning
Garamond blue type
Indicates a cross-reference hyperlink that points to a figure, graphic, table, or sec-
tion heading. Clicking on the hyperlink jumps you to the reference. When you
have finished reviewing the reference, click on the
Go to Previous View
button
in the Adobe® Acrobat® Reader toolbar to return to your starting point.
Helvetica bold type
Commands and keywords are in
boldface
font.
Helvetica bold-italic type
Parts of commands, which are related to elements already named by the user,
are in
boldface italic
font.
Italicized Helvetica type
Variables for which you supply values are in
italic
font
Helvetica type
Indicates the names of fields or windows.
Garamond bold type
Indicates the names of command buttons that execute an action.