manualshive.com logo in svg

Patton BODi rS 1000 Series, User Manual

Share
Download
Patton BODi rS 1000 Series User Manual Download Page 48

Configuring the WAN Interface

48

BODi rS BD1000 User Manual 

3 • Configuring LAN & WAN Interfaces

Bandwidth Allowance Monitor

The Bandwidth Allowance Monitor feature tracks network usage for the BD1000. The Bandwidth Allowance
settings for each WAN connection can be independently configured. 

To configure the Bandwidth Allowance Monitor, click on

 Network > WAN

 in the Web Admin Interface.

Then, click on the 

Details

 button in the row of the desired WAN connection in the 

WAN Connection Status

table. The configuration page for that WAN connection displays, which includes the 

Bandwidth Allowance

Monitor 

option. Select the box to enable and configure Bandwidth Allowance settings.

Figure 26. Network > WAN > Details > Bandwidth Allowance Monitor

Table 19. WAN: Bandwidth Allowance Monitor

Method

Description

Action

Enable the 

Email Notification

 feature to be notified through email when net-

work usage hits 75% and 95% of the monthly allowance.
Select the 

Disconnect when usage hits 100% of monthly allowance

 

box to automatically disconnect this WAN service when the usage hits the 
monthly allowance. It will not resume connection unless this option has been 
turned off, or the usage has been reset when a new billing cycle starts.

Start Day

Defines which day in the month each billing cycle begins.

Monthly Allowance

Defines the maximum bandwidth usage allowed for the WAN connection each 
month.

Summary of Contents for BODi rS 1000 Series































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands